Skip to content

CC3000 Tiny

This module implements the cc3000 wifi driver with stripped down functionalities for low resource devices. The following funtionalities are missing:

  • wifi network scanning
  • ping
  • smart_config

Refer to cc3000 for usage info.

auto_init

auto_init()

Tries to automatically init the CC3000 driver by looking at the device type. The automatic configuration is possible for all the Arduino compatible devices and for the Particle Core.

Otherwise an exception is raised.

init

init(spi, nss, wen, irq)

Tries to init the CC3000 driver. spi is the name of the spi driver the CC3000 is connected to. nss is the pin used as Chip Select (CS). wen is the pin used as Wireless Enable. irq is the pin used by the CC3000 to generate an interrupt.